Atec Gantner-Q-brixx - Manual (Page 2)

Q. brixx gate
Base Unit with Test Controller
Gantner Instruments Incorporated  www.gantnerinstruments.com  [email protected]
9835 Carroll Centre Road, Suite 100 Toll Free: (877) 725-6997 (877 QBLOXXS) Toll Free Fax: (800) 303-9381
San Diego, CA 92126 USA Direct: (858) 537-2060 Direct Fax: (858) 537-2064
Host Interface Ethernet
Protocols TCP/IP, UDP, PING, ASCII, Modbus TCP/IP
Services DHCP, FTP-Server, FTP-Client, e-Mail-Send-Client (SMTP)
Baud rate 10/100 Mbps
Data rate max. 800 kByte/s
Number of simult. Clients 10
Isolation voltage 500 V
Host Interface USB
Version USB 2.0
Data rate typ. 100 kByte/s
Devices Data storage, formatted with FAT or FAT 32
Data Memory
RAM 16 MByte (optional 90 MByte), cycle buffer
Flash 128 MByte
Operating System Independent
Standardized interface Ethernet (FTP/Berkeley-Socket)
Synchronization of a Multi Test Controller System
Interface RS485 Standard
Mode Master Slave principle, IRIG standard
DCF77, AFNOR etc, GPS over IRIG standard
GPS NMEA over RS232
SNTP over Ethernet
Power Supply
Power supply 10 up to 30 VDC, over voltage and overload protection
external power supply unit 115 VAC/230 VAC included
Power consumption base unit. 3 W, additionally 2 W each module
Plug Options of the Modules
Standard pluggable screwing terminals
Option multifunctional Inputs: DSub 9
voltage inputs and outputs: BNC
thermocouples: TCK
others on request: