Atec Hipotronics-TDR-1150 - Manual (Page 2)

European Contact Locate your local USA Contact
Haefely Test AG
Lehenmattstrasse 353
CH-4028 Basel
Switzerland
+ 41 61 373 4111
 + 41 61 373 4912
|
[email protected]
sales representative at
www.high-voltage-hubbell.com
Hipotronics Inc.
1650 Route 22
PO Box 414
Brewster, NY 10509 USA
+ 1 845 279 8091
 + 1 845 279 2467
| [email protected]
Hipotronics has a policy of continuous product improvement. Therefore we reserve the right to change design and specification without notice TDR1150-DS / 03.2009
MEASURING SETUP DIAGRAM
TECHNICAL SPECIFICATIONS
General
Power Supply Battery operated Charger input
120 V, 50/60 Hz for -A version
230 V 50/60 Hz for –B version
Pulse Characteristics Pulse Amplitude 25V into 50 Ω Pulse Width 100ns to 20µSec
Input Protection 480 V AC
Range Time 1.28 µSec to 0.66 mSec Distance 1 foot to 196,000 feet
Measurement Accuracy Sample Rate 100MHz Resolution 2.5 feet (10nSec)
Operational Modes Arc Reflection, TDR Direct, current Pulse
Storage Stores 16 sets of 3 traces or 6 pre-recorded setups with information and 10
sets of 3 trace signatures
Monitor LCD Display 7.0 inch
Environment Operating Temperature
Storage Temperature
10°F to 122°F (-12°C to 50°C)
-40°F to 140°F (-40°C to 60°C)
Weights and Dimensions (W x H x D, net weight, ship weight)
TDR1150 14” x 9.5” x 6” (360 x 240 x 150 mm) 15 lbs (7 kg) 25 lbs (11.3kg)
SCOPE OF SUPPLY
Qty. 1 TDR1150 in portable, water resistant case
Qty. 1 100/240 V, 12 Vdc power supply (PN211212), with 6 ft (1.8
m) cord
Qty. 1 RG58/U BNC-BNC cable (PN20097), 15 ft (4.6 m)
Qty. 1 BNC/clip cable (PN210946), 2.5 ft (0.76 m)
Qty. 1 Serial interface cable (PN210947), 6.5 ft (2 m)
Qty. 1 Operations Manual and TDR-PC interface software
Qty. 1 Calibration Certificate
ORDERING INFORMATION
System
Time Domain Reflectometer TDR1150-A
TDR1150-B
TDR Retrofit Kit to upgrade
existing with TDR1150. TDR-1150-RTRFT
Accessories
Power supply for TDR-1150 1150-PS
HV Coupler to protect TDR from HV
of cable fault locator. HVC4100 Series
Cable Fault Locaters (Thumper) 30
(8µf) and 70 kV (12 or 24 µf). CF Series
Controlled Energy Thumpers 1500 J
or 2000 J and 8/16/32 kV output. CET Series
HV Cable Rack with 125 ft of 70 kV
cable and 125 ft of safety ground. 8100