Atec Rohde-Schwarz-ESRP Series - Manual (Page 14)

Version 01.01, January 2013
14 Rohde & Schwarz R&S ® ESRP EMI Test Receiver
LAN interface 10/100/1000BaseT
Connector RJ-45
External monitor
Connector
VGA-compatible, 15-pin mini D-Sub
User port
Connector
9-pin D-Sub male
Output TTL-compatible, 0 V/5 V (nom.),
max. 15 mA (nom.)
Input TTL-compatible, max. 5 V (nom.)
IF/video out (analyzer mode)
Connector
BNC female, 50 Ω (nom.)
IF out
Bandwidth
= RBW setting
IF frequency 32 MHz (nom.)
Output level (gain versus RF input) RF attenuation = 0 dB,
RF preamplifier = off, span = 0 Hz 0 dB (nom.)
Video out
Bandwidth
= VBW setting
Output scaling log. display scale logarithmic
lin. display scale linear
Output level center frequency > 10 MHz, span = 0 Hz,
signal at reference level and center
frequency 1 V, open circuit (nom.)
Trigger out
Connector
BNC female
Output TTL-compatible, 0 V/5 V (nom.)