Atec Panametrics-Olympus-37DL-Plus - Manual (Page 4)

Dual Element Measurement Mode: Time
interval from a precision delay after
the excitation pulse to the first echo.
Thru-Coat Measurement: Measurement
of true metal and coating thickness
using a single backwall echo (with
D7906-SM and D7908 transducers).
Thru-Paint Echo-to-Echo: Time
interval between two successive back-
wall echoes for elimination of paint or
coating .
Single Element Measurement Mode:
Mode 1: Time interval between
excitation pulse to first backwall echo.
Mode 2: Time interval between delay
line echo to first backwall echo with
delay or immersion transducers.
Mode 3: Time interval between
successive backwall echoes following
the first interface echo after the
excitation pulse with delay line or
immersion transducers.
Optional Oxide/Scale Measurement:
Measure metal thickness and internal
oxide/scale build-up of pipes. Oxide/
scale thickness range:
M2017: 0.010 - 0.050” (0.25 - 1.25 mm)
M2091: 0.006 - 0.050” (0.15 - 1.25 mm)
Thickness Range:
0.003 - 25.000 inches (0.080 - 635.00mm),
depending on material, transducer
surface condition, temperature, and
SETUP selected
Material Velocity Range:
0.020 - 0.551 inch/μS
(0.508 - 13.998 mm/μS)
Resolution, selectable:
LOW:
0.01” 0.1 mm
STANDARD: 0.001” 0.01 mm
Battery:
6V rechargeable NiCad battery pack, or
field-replaceable alkaline AA batteries
Battery Life:
25 hours in normal measurement
mode with backlight off
Fast-Charger:
Two-hour Fast-Charger with universal
voltage
Transducer Frequency Range:
2-30 MHz (-3 dB)
Operating Temperature:
-10 to +50°C (+14° to 122°F)
Keypad:
Sealed color-coded keypad with tactile
and audible feedback
Case:
Impact-resistant and Water-resistant,
gasketed Lexan® case with sealed con-
nectors. Environmental IP-65 compliant
Liquid Crystal Display:
With backlight. Contrast keypad
adjustable. Display area 4.0 x 3.39 inch
(102 x 86 mm)
Hazardous Area Operations:
As defined by MIL-STD-810E, method
511.3, procedure 1
Rectification:
Full wave, RF, half wave positive, or half
wave negative
Display Range and Delay Control
Metric/English Units
Size:
9.375 x 5.45 x 1.5” (238 x 138 x 38 mm)
Weight:
2.1 lbs. (0.95 Kg)
InternAL DAtALoGGer
Datalogger and RS-232:
The 37DL PLUS identifies, stores,
recalls, clears, and transmits thickness
readings, waveform images, and gage
setup information via the RS-232 serial
port. Baud Rate, Word Length, Stop
Bits, and Parity are adjustable from the
keypad.
Maximum # of Stored Values:
Standard: 60,000 thickness readings
or 4,500 waveforms with thickness
readings
File Names, ID# and Comments:
32 character file name plus 20 charac-
ter alphanumeric location code with 4
comments per location
File Structures:
7 standard or custom application
-specific file structures
Reports:
On-gage reporting of summary with
statistics, Min/Max with locations,
File Comparison, and Alarm Report.
On-screen comparison of current and
previous readings.
stAnDArD InCLUsIons
Model 37DL PLUS Digital Ultrasonic
Thickness Gage with Waveform
Verification, AC or Battery Operation,
50-60 Hz
• D790-SM Transducer, 5.0 MHz, 0.434”
(11mm) tip, temp. range -5° to 932°F
• Charger/AC adapter (100, 115, 230
VAC)
• Internal Datalogger
• WIN37DL PLUS Interface Program
• Test Block and Couplant
• RS-232 Cable
• Protective Pouch with Neck Strap
• Instruction Manual
• Two-Year Limited Warranty
• Measurement features: Thru-Coat,
Echo-to-Echo Thru-Paint, EMAT
Compatability, Min/Max Mode,
Two Alarm Modes, Differential
Mode, B-scan, Application Auto
Recall, Temperature Compensation,
Average/Min Mode
optIonAL ACCessorIes
37DLP/EW Third-Year warranty
WIN37DL PLUS/CCG (Color-coded
Grid software)
36CA/EC-115 External Fast Charger,
115 VAC
37DLP/SU/OXIDE Software option for
the measurement of boiler tubes and
internal oxide
1/2XA/E110 Filter adapter for
E110-SB EMAT transducer
Printed 9/2005
© 2005 Olympus NDT, All Rights Reserved.
*All specifications are subject to change without notice.
Panametrics, Panametrics-NDT and the Panametrics-NDT logo are trademarks of Panametrics Inc.
Other company or product names mentioned in this document may be trademarks or registered
trademarks of their respective companies. *All specifications are subject to change without notice.
37DL PLUS SPECIFICATIONS*
Olympus NDT, Inc.
48 Woerd Ave, Waltham, MA U.S.A.
TEL 781-419-3900 • 800 225-8330 in North America
e-mail: [email protected]
www.pAnAmetrICs-nDt.Com