Atec Panametrics-25DL - Manual (Page 6)

S P E C I F I C A T I O N S 2 5 D L
*Thickness range depends on material, transducer, surface condition, temperature, and SETUP selected.
All specifications are subject to change for product improvement without notice.
MEASUREMENT MODES:
Mode 1: Time interval between excitation pulse
and first backwall echo. Using contact transducers.
Mode 2: Time interval between the first interface
echo after the excitation pulse and the first backwall
echo. Using delay line or immersion transducers.
Mode 3: Time interval between successive backwall
echoes following the first interface echo after the
excitation pulse. Using delay line or immersion
transducers.
THICKNESS MEASUREMENT RANGE:
Steel: 0.006 - 20 inches (0.15 - 500mm).*
Plastic: 0.003 - 2 inches (0.08 - 50mm).*
Extended thickness ranges are possible using
custom setups.
MATERIAL VELOCITY RANGE:
0.02000 - 0.55110 inch/µS
(0.5080 - 13.9979mm/µS).
RESOLUTION, keypad selectable:
LOW: 0.01" 0.1mm
STANDARD: 0.001" 0.01mm
HIGH: 0.0001" 0.001mm
MEASUREMENT RATE, keypad selectable:
1, 2, 5, or 10 measurements per second.
BATTERY:
6V Rechargeable NiCad battery pack.
Optional replaceable alkaline “AA” cells.
BATTERY LIFE:
30 hrs nominal (normal operation), Nicad.
Optional alkaline “AA” cells approximately 70
hours.
LOW BATTERY INDICATOR:
Active display shows percentage of remaining battery
life. Symbol blinks when voltage becomes low.
BATTERY CHARGE TIME:
7 hours using provided charger.
CHARGER:
External wall plug-in charger/AC Adapter for
100/115/230 VAC inputs.
AUTO POWER OFF:
Unit automatically shuts off 6 to 18 minutes
(selectable) after last measurement or keystroke.
Also when voltage is too low.
RECEIVER BANDWIDTH:
2 - 30MHz (-3dB).
OPERATING TEMPERATURE:
-10° C to +50°C.
KEYPAD:
Sealed color coded keypad with tactile and audible
feedback.
SIZE:
L7.70 x W3.39 x D1.70"
L195.6 x W86.2 x D66.9mm.
Depth at display is slightly larger.
WEIGHT:
1 lbs. 3oz. (0.59Kg).
THICKNESS DISPLAY:
5-Digit LCD with Backlight. 0.5" (12.7mm) numerals.
Viewable area 2.2" x 1.5" (56.3 x 38.4mm).
BACKLIGHT, keypad selectable:
Electroluminescent backlit display. Contrast keypad
adjustable.
DISPLAY MIN/MAX MODE, keypad selectable:
Displays current thickness, minimum thickness,
or maximum thickness depending on setting.
DISPLAY HOLD/BLANK, keypad selectable:
Display blanks after last reading or holds reading.
ALARM MODE, keypad selectable:
Programmable Hi-Low alarm setpoints with audible
and visual indicators.
DIFFERENTIAL MODE, keypad selectable:
Displays thickness difference between actual
measurement and preset reference value.
APPLICATION AUTO-RECALL:
The 25DL automatically adjusts internal parameters
and zero offset for a wide variety of transducers.
STORED STANDARD SETUPS:
15 stored transducer setups to allow fast, easy
calibration for Panametrics standard transducers.
STORED CUSTOM SETUPS:
Up to 16 stored custom transducer setups for best
performance in special applications.
PC SCOPE:
Allows measurement waveform with gates and
thickness readings to be viewed live on a computer.
METRIC/ENGLISH UNITS, keypad selectable:
Allows instant conversion between English and
metric units.
MULTI- LANGUAGE DISPLAY:
Keypad selectable display languages. Included are
English, French, German, and Spanish.
OTHER STANDARD 25DL FEATURES: Calibration
Lock Mode, Internal Diagnostic Test Mode.
Internal Datalogger
DATALOGGER AND RS-232:
The 25DL will identify, store, recall, clear, and
transmit thickness readings and gage setup
information via the full duplex RS-232 Serial Port.
MAX. # OF STORED VALUES:
Over 5,000 thickness readings.
STORED DATA DOCUMENTATION:
Each saved thickness reading is fully documented
with measurement status flags and a setup number
which identifies parameters such as velocity, trans-
ducer, etc.
IDENTIFICATION CODES:
10 character alphanumeric Identification Code
system identifies or locates stored data.
AUTO INCREMENTING:
Datalogger automatically advances to the next
alphanumeric identification code, starting at the
right most character.
ON-BOARD STATISTICS CALCULATOR:
Permits statistical reporting directly to Serial Printer.
BAUD RATE, keypad selectable:
1200, 2400, 4800, or 9600.
WORD LENGTH, keypad selectable: 7 OR 8 bits.
STOP BITS, keypad selectable:Even, odd, or none.
Ordering Information
Model 25DL Digital Ultrasonic Multi-Mode
Thickness Gage, AC or Battery Operation, 50-60Hz,
with Internal Alphanumeric Datalogger. Including:
Charger/Adapter (100, 115, 230VAC)
Transducer Cable
Test Block
Couplant
RS-232 I/O Cable
Carrying Case
Instruction Manual
Two Year Limited Warranty
Optional Accessories
25DL/SPC Protective Pouch with Neck Strap
25DL/DLIP Interface Program
25DL/EW Extended Limited Warranty, 3rd Year
25SM PC Scope
26PR Portable Printer, 80 column, Battery or
115 VAC
2214E † 5-Step Test Block, 1018 steel, English
Units: .100", .200", .300", .400", .500"
2213E † 5-Step Test Block, Aluminum, English
Units: .100", .200", .300", .400", .500"
26DL/OCC Heavy Duty Shipping Case
† Test Blocks are available in metric units.
Please contact Panametrics for other accessories
available with the model 25DL.
221 Crescent Street
Waltham, MA 02453 USA
(781) 899-2719
Toll Free USA (800) 225-8330
Fax (781) 899-1552
http://www.panametrics.com
© Panametrics, Inc. Printed in U.S.A. 08/99
ISO 9001 Certified