Atec Fluke-I2000 - Manual

600V
CAT III
Designed and
Conforms to
IEC 1010-1
Fluke. Keeping your world
up and running.
C0174UEN 5/98 Rev A
For current measurement on large and difficult
to reach conductors
Ordering Information
Fluke i2000flex Current Probe
Need Technical Assistance? Call:
1-800-44-FLUKE
Toll-free in the U.S.
(905) 890-7600 in Canada
(425) 356-5500 other countries
For more information to be sent
to you by fax, call 1-800-FLUKE-FAX
in the U.S. and Canada. Or, visit our
Website at http://www.fluke.com
The i2000flex is a flexible, ac current
probe for oscilloscopes and digital
multimeters recommended for current
measurement on large and difficult
to reach conductors.
• Maximum current measurement rating
is 2000A ac
• Switchable between 200A and 2000A
• Includes a 62 cm (24.4") circumfer-
ence flexible probe with a connector
for coupling and decoupling around
a conductor
• Includes BNC connector, making it
suitable for use with any oscilloscope,
power analyzer or ScopeMeter
® ® test
tool having a compatible BNC input
connector
• Dual banana to BNC adapter is
included for use with DMMs
• CAT III 600V
• The output signal is 10 mV/A in the
200A range and 1 mV/A in the 2000A
range
• 9V alkaline battery, installed
• At least 100 hour battery life
• One year warranty
• UL approval is pending
i2000flex Current Probe
POWER ON
2000
A 1 mV/A
200
A 10 mV/A OFF
FLEXIBLE AC CURRENT PROBE
BATTERY LOW
i2000
FLEX
INPUT AND OUTPUT