Atec Fluke-190 Series - Manual

20 years of ScopeMeter
®
Test Tool Innovation
Introducing the complete
190 Series II
Technical Data
190 Series II—a new generation of
Fluke ScopeMeter Oscilloscopes
The 190 Series II include these capabilities:
• Up to four independent floating isolated inputs, up to 1000 V
• Up to 5 GS/s real time sampling (Depending on model and channels used)
• Deep memory: 10,000 points per trace waveform capture (scope mode)
• CAT III 1000 V/CAT IV 600 V safety rated instrument for industrial
environments
• Up to seven hours of battery operation using BP291
• Isolated USB host port for direct data storage to a USB memory device;
USB device port for easy PC communication
• Easy access battery door for quick battery swaps in the field
• Compact and only 2.2 kg (4.8 lb)
• Security slot: lock down oscilloscope with Kensington
®
lock while
unattended
• IP 51 rating, dust- and drip-proof
• Connect-and-View
™
triggering for intelligent, automatic triggering on fast,
slow and even complex signals
• Frequency Spectrum using FFT-analysis
• Automatic capture and REPLAY of 100 screens
• ScopeRecord ™ Roll mode gives 30,000 points per input channel for low
frequency signal analysis
• TrendPlot
™
paperless recorder mode with deep memory for long-term
automatic measurements
• 5,000 count DMM included in the 2-channel models
CE
RTIF
IED TO MEET IS O 9
00
1
® QU
AL ITY
MANA
GEMENTS
YST
EM
190 Series II ScopeMeter
Oscilloscopes—the first high-
performance scopes built for
harsh industrial environments
Introducing the first high-performance portable
oscilloscopes with 2 or 4 independently insulated
input channels, an IP51 dust- and dripwater proof
rating and a CAT III 1000 V/CAT IV 600 V safety rating.
Choose from 500 MHz, 200 MHz, 100 MHz or
60 MHz bandwidth models. Now plant maintenance
engineers can take a 2- or 4-channel scope into the
harsh world of industrial electronics.
New
500 MHz