Atec Noise-Com-NC7108 User Manual
Page 2
Advertising
2-2
FUNCTIONAL SPECIFICATIONS
Non Volatile memory to retain program parameters, GPIB address,
serial baud rate and user programmed control sequences
NOISE COM, INC.,
Baud Rates:
300, 1200 and 9600 to be used with
optional serial interface ports.
Time Delay:
. 1 to 999.9 seconds with .1 second
resolution.
Programmable Attenuator:
Standard 0-127DB in 1DB steps.
Programmable Attenuator:
Optional 127.9DB in 0.1DB steps.
Bandwidth selection:
Optional band switching filter to
customer specification.
Consult
Noise Com.
Standby Position:
Power is switched into a dummy load.
Reset:
A logic reset button is provided.
Second Output:
Optional SPDB Switch to connect
either of two outputs.
Advertising