Atec Fluke-724 - Manual (Page 21)

Temperature Calibrator
Getting Acquainted with the Calibrator
11
Table 4. Key Functions
No Name Description
A O
Turns the power on or off.
B V
Selects voltage measurement function in the upper display.
C A
Selects the mA measurement function in the upper display.
D K
Activates a 24-volt loop supply while measuring mA.
E C
Turns backlight on or off. Turns contrast adjust mode on when powering up.
F F
Displays temperature in degrees Celsius when in TC or RTD functions.
G D
Displays temperature in degrees Fahrenheit when in TC or RTD functions.
H G
Recalls from memory a source value corresponding to 100 % of span and sets it as the source value.
Press and hold to store any source value as the 100 % value.
I H
Increments output by 25 % of span.
J I
Decrements output by 25 % of span.
K J
Recalls from memory a source value corresponding to 0 % of span and sets it as the source value.
Press and hold to store the source value as the 0 % value.
Identifies Firmware version. Press and hold
J
when powering up.