Atec Fluke-750 Series - Manual (Page 4)

It’s easy to calibrate and maintain HART instrumentation with one powerful tool.
With the 754 DPC, you can:
• Generate precision electrical, temperature, or
pressure signals for analog stimulus or sensor
simulation.
• Simultaneously measure electrical, temperature,
or pressure signals from transmitter output.
• Determine type, manufacturer, model, tag ID by
interrogating HART devices.
• Read HART PV function and smart transmitter
digital output while measuring analog mA output.
• Read and write HART configuration functions to
make field adjustments to PV range points, damping,
and other top-level configuration settings.
• Change sensor configuration on supported
temperature transmitters.
• Re-label smart transmitters by reading and writing
HART tag and message fields.
• Clone additional transmitters by reading and
storing basic HART configurations.
• Perform automated HART sensor trim and output
trim for selected devices in conjunction with
As Found/As Left tests.
• Perform loop test with simultaneous analog and
digital mA readout.
• Address new, fast, pulsed-excitation smart
trans-mitters and PLCs.
• Control Hart Scientific Dry Block Calibrator.
4 Fluke Corporation 750 Series Brochure
+ –