Atec Fluke-740 Series User Manual

Page 4

Advertising
background image

It’s easy to calibrate and maintain HART instrumentation with one powerful tool.

With the 744 DPC, you can:
•
Generate precision electrical, temperature, or

pressure signals for analog stimulus or sensor
simulation.

• Simultaneously measure electrical, temperature, or

pressure signals from transmitter output.

• Determine type, manufacturer, model, tag ID by

interrogating HART devices.

• Read HART PV function and smart transmitter

digital output while measuring analog mA output.

• Read and write HART configuration functions to

make field adjustments to PV range points, damping,
and other top-level configuration settings.

• Change sensor configuration on supported

temperature transmitters.

• Re-label smart transmitters by reading and writing

HART tag and message fields.

• Clone additional transmitters by reading and

storing basic HART configurations.

• Perform automated HART sensor trim and output

trim for selected devices in conjunction with As
Found/As Left tests.

• Perform loop test with simultaneous analog and

digital mA readout.

• Address new, fast, pulsed-excitation smart transmit-

ters and PLCs.

• Control Hart Scientific Dry Block Calibrator.

4

Fluke Corporation

740 Series Brochure

Advertising