Atec Vitrek-930i - Manual (Page 2)

Alternating Current Output
Range: 3 to 30 amperes RMS, programmable
Resolution: 1 amp
Output Frequency: Sinewave synthesis,
50Hz to 400Hz
Compliance Voltage: 3 volts RMS
Regulation: ± 0.25% no load to full load
Resistance Measurement
Resistance Limit: User programmable max.
and min. Test is automatically aborted when
limit is exceeded
Resistance Range: 1
Ω
at 3 amps linearly
decreasing to 100 m Ω at 30A
Resistance Resolution: 10µ Ω
Measurement Accuracy: ± 1.0% of reading;
± 0.5% of range
Accuracy: Specifications apply for 1 year, ±
5°C from the cal temp within 20°C to 30°C
Calibration: Certificate of calibration trace-
able to the National Institute of Standards
and Technology (NIST) provided
Test Time: Digital count down timer, pro-
grammable 1 to 9999 seconds
Terminal Configuration: True four-wire kelvin
General Specifications
Remote Interface: VICL and serial
com standard. PLC optional
Display: 40 character dot matrix illuminated
liquid crystal display
Indicators: L.E.D. status indicators
Alarm: Audible and visual alarms provide
pass/fail indication
Diagnostics: Built-in self diagnostics test
ROM, RAM and output system
Safety: CE mark certified to EN61010
Accessories: K-2, VIC-3, BBL-2 and opera-
tors manual supplied with unit
Warranty: Extended 5 year parts and labor
with annual factory calibration and mainte-
nance. Standard warranty one year
Operating Temperature: 0°C to 50°C
Humidity: 90% RH 0°C to 40°C
Power: 115/230 VAC ± 10% 250 VA max
Dimensions: 89mmH x 432mmW x 457mmD
(3.5”H x 17”H x 18”D)
Weight: 11Kg (24 lb.) Net/15Kg (34 lb.)
shipping
Ordering Information
Vitrek 930i Automatic Ground
Integrity Analyzer . . . . . . . . . . . . . . . . . . .
TL115HC Outlet Test Adapter . . . . . . . . . .
K-4 4-wire 4-clip 30A lead set. . . . . . . . . .
K-2 4-wire 2-clip 30A lead set. . . . . . . . . .
RM-1 Rack Mount Adapter Kit . . . . . . . . .
PLC-3 Logic Level Interface . . . . . . . . . . .
RS-1 RS232 Cable 6 ft. . . . . . . . . . . . . . .
VIC-3 930i to 944i 2 Meter
Communication Cable. . . . . . . . . . . . . . . .
OM-930 Extra Operators Manual. . . . . . . .
Represented by:
The 930i shown here with the Vitrek 944i Dielectric Analyzer and TL-115HC Test Adapter. These two
units in tandem provide hipot and ground bond test capability from the touch of a single button.
Vitrek Corporation
www.vitrek.com
9880A Via Pasar – San Diego, CA 92126
Voice: 858-689-2755 Fax: 858-689-2760
Email: [email protected]
Prices and specifications subject to change without notice.
©Copyright 1998. Vitrek Corporation. All rights reserved.
CLC-ILU 50K
Alternating Current Output
Resistance Measurement
General Specifications Ordering Information
W O R L D L E A D E R S I N C O M P L I A N C E A U T O M A T I O N
S M