Atec Teseq-Schaffner-NSG3060 - Manual (Page 2)

A d v a n c e d Te s t S o l u t i o n s f o r E M C
Combination wave pulse 1, 2/50 - 8/20 µs (Hybrid-Surge pulse)
Pulse conforms to IEC/EN 61000-4-5 and ANSI (IEEE) 62.41
Teseq AG
Nordstrasse 11F 4542 Luterbach Switzerland
T + 41 32 681 40 40 F + 41 32 681 40 48
[email protected]
www.teseq.com
THE MODULAR SOLUTION FOR 6 KV APPLICATIONS
NSG 3060
691-130B August 2009
Parameter Value
Pulse voltage (open circuit): ±200 V to 6.6 kV (in 1 V steps)
Pulse current (short circuit): ±100 A to 3.3 kA
Impedance: 2/12 Ω
Polarity: positive / negative / alternate
Pulse repetition: 5* to 20 s, up to 600 s (in 1 s steps)
* derated depending on selected pulse voltage and
EUT supply voltage
Test duration: 1 to 9999 pulses, continuous
Phase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)
Coupling: ANSI / IEC / external
The NSG 3060 has an Ethernet port for external PC control. The Windows-based control software
simplifi es test programming and allows compilation of complex test sequences with diverse pulse types.
Test reports can be generated during the test operation, allowing the operator to enter observations as
the test progresses and increasing the effi ciency of long-term tests.
Ringwave 0.5 µs/100 kHz
Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41
Parameter Value
Pulse voltage (open circuit): ± 200 V to 6.6 kV (in 1 V steps)
Pulse current (short circuit): ±16.6 to ±550 A, ±10%
±6.6 to ±220 A, ±10%
±1 to ±33 A, ±10%
Impedance: 12/30/200 Ω
Polarity: positive / negative / alternate
Pulse repetition: 5* to 20 s, up to 600 s (in 1 s steps)
* derated depending on selected pulse voltage and
EUT supply voltage
Test duration: 1 to 9999 pulses, continuous
Phase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)
Coupling: ANSI / IEC / external
The NSG 3060 performs tests according to the following specifi cations: