Atec Teseq-AES_5501 - Manual

AUTOMOTIVE EMISSIONS SYSTEM FOR ISO 7637-2
AES 5501
The AES 5501 is a system of electronic and mechanical switches, an artifi cial network, and a unique
control station designed for emissions testing to ISO 7637-2. Having gone through meticulous develop-
ment and intensive beta testing, the AES 5501 contains unique features and uncompromising quality
and conformity found nowhere else. Consisting of a four-part solution, the user has complete control
over where, when and how the switches can be placed and controlled, including the necessary drive
voltages for the relays.
The 100 A connectors are carefully placed and countersunk to allow precise cabling between the
switches, the artifi cial network and test bench and allows for the electronic or mechanic switches to be
placed at any point before or after the artifi cial network. Multiple switches may also be utilized at the
same time as required. This careful attention to detail for switch placement and cable length means
that numerous manufacturer standards can also be met. The AES 5501 features a rugged construction
with unpainted underside for good earth contact, precise switching control and numerous monitoring
locations. A counter for the relay and LED indicators for both electronic and mechanical switches are pro-
vided. The AES 5501 has temperature controlled fans for quiet operation and a thermal shutdown feature.
Block diagram
The only complete, compliant
solution for ISO 7637-2 emissions
testing
Clean, reliable 100 A operation
with very low voltage drop
Industry standard relay footprint
for a wide selection of relays
(one 100 A relay included)
Separate control station with au-
tomatic, manual or external trig-
gering of the switching behavior
Smaller switch enclosure for
easier compliance to various
cable-length requirements
Totally redesigned AN with
improved, fully compliant imped-
ance curve
Convenient measurement ports
Oscilloscope
EUT Battery
Source
ES 5501 AN 5501
SC 5501