Atec Solar-8850-1 User Manual
Page 2
MODEL 8850-1 HIGH POWER SWEEP GENERATOR
SPECIFICATIONS
Frequency Range: 30 Hz to 100 KHz in four
bands, manually tunable or by automatic sweep
and continuous display on digital panel meter.
Output Power: 300 watts into 1.5 ohms
200 watts into 2.5 ohms.
Output Voltage: 22 volts r.m.s. maximum at
1 KHz.
Output Current: 15 amperes maximum at 1 KHz.
Output Level: Manually controlled by panel
knob.
Continuously displayed on digital
panel meter.
Sweep Duration: One minute for one band
or one minute for all four bands selected by push-
buttons.
Remote Sense: Automatically maintains output
voltage at the level set by the operator, up to
7.5 volts r.m.s., as frequency is scanned or swept.
Frequency Stability: 250 ppm/C.
Output Level Drift: Less than 0.5%.
Overload Protection: Automatic shut down for
excess temperature, over-voltage, or over-current
conditions in output circuit.
Power Requirements: 115 volts 60 Hz, 6 amperes
(230 volts 50 Hz, 3 amperes available.)
Size: 8.75" wide, 17.25" high, 13" deep.
(22.22 cm x 43.82 cm x 33.02 cm.)
28