Atec Thermo Scientific-E513 - Manual

• Controlled Open-Circuit Voltage Ramps of:
0.1kV/µs, 0.5kV/µs, 1.0kV/µs, 5.0kV/µs, 10kV/µs.
• Open-Circuit Voltage: to 3kV peak
• Short-Circuit Current: to 50A peak
• All test parameters under software control
via KeyTek SurgeWare ™ .
• Ability to add a complete range of modules:
– Surge and EFT simulator modules for all major
national and international standards.
– AC mains coupler/decouplers for single or
three-phase lines, to 600V rms, and 100A
continuous AC line current.
– I/O line coupler/decouplers for all types of lines,
including telecom and RS-232.
ECAT ®
Model E513
Surge Simulator for Voltage Ramps
A plug-in module for ECAT systems
to produce voltage ramps for testing
surge protection components,
such as gas tube arrestors. Meets
the surge simulator requirements
of UL 864.
FEATURES
• The ECAT is configurable as a compact,
standalone system with one test capability or as
an integrated, multiple capability tester.
• Unparalleled safety features for high voltage
testing, including a complete interlock system that not
only disables simulator operation if activated, but
completely removes AC mains power from the EUT,
when using any KeyTek AC mains coupler/decoupler.
• Automatic report generation using KeyTek’s
exclusive Windows ® -based software.
• Modular system construction provides the ability
to upgrade test capabilities as requirements change
or evolve.
• Single port testing for Surge, EFT and PQF ™ mains
coupled disturbances allows changing test modes
without switching off power to the EUT. This avoids
lost time due to re-initializing the EUT between tests.
SYSTEM BENEFITS