Atec Tektronix-VM100-VM101 - Manual (Page 3)

Appendix A: Specifications
VM 100 & VM101 User Manual A–3
Table A–3: Measurement accuracy
Category 1 Description
Differential Phase REQ:
<
1.0
°
RI: Typically
<
0.5
°
from 20
°
C to 30
°
C with test signal generator source
Differential Gain REQ:
<
2.0%
RI: Typically
<
1% from 20
°
C to 30
°
C
for nominal 300 mV chrominance
amplitude
Chrominance-to-Luminance Gain REQ:
<
2%
RI: Typically
<
1% from 20
°
C to 30
°
C
with test signal generator source
Chrominance-to-Luminance Delay REQ:
<
20 ns
REQ:
<
10 ns from 20
°
C to 30
°
C with test
signal generator source.
RI: Typically
<
5 ns from 20
°
C to 30
°
C with test signal generator source
Frequency Response REQ:
<
0.2 dB
RI: Typically
<
0.1 dB (1 %) from 20
°
C
to 30
°
C with test signal generator
source
RI: VM100: 50 kHz to 4.2 MHz
VM101: 50 kHz to 5.8 MHz
2T K-Factor REQ: 2 %
RI: Typically
<
0.5 % from 20
°
C to 30
°
C with test signal generator source
1 All tests are performed with AVG enabled. Processing time for each
measurement is a function of the signal-to-noise ratio.