Atec Tektronix-VM6000 - Manual (Page 20)

Data Sheet
General
Display Characteristics
Characteristic Description
Display Type Liquid-crystal active-matrix color display
Display Size Diagonal: 307.3 mm (12.1 in.)
Display Resolution XGA 1024 (H) × 768 (V) pixels
Waveform Styles Vectors, Dots, Variable Persistence, Infinite Persistence
Color Palettes Normal, Green, Gray, Temperature, Spectral and User
Defined
Display Format YT, XY
Computer System and Peripherals
Characteristic Description
Operating System Windows XP
CPU Intel Pentium 4, 3.4 GHz processor
PC System Memory 2 GB
Hard Disk Drive Rear-panel, removable hard disk drive, 80 GB capacity
CD-R/W Drive Front-panel CD-R/W drive with CD-creation software
application
DVD Drive Read only
Mouse Optical wheel mouse, USB interface
Printer (Optional) Thermal printer; fits in accessories pouch provided with
instrument
Keyboard 119-7083-xx for small keyboard (fits in pouch); USB
interface and hub
Input/Output Ports
Characteristic Description
Front Panel
Video Input Front-panel BNC connectors (3) for 3-wire CAV. A fourth
BNC for separate composite sync or H Sync input on
RGBHV signals. A fifth BNC (auxiliary input) for V Sync
on RGBHV signals. Trigger level range is adjustable from
+8 V to -8 V. The maximum input voltage is ±20 V (DC +
peak AC) and input resistance is ≥1.5 kΩ
Probe Compensator
Output
Front-panel pins
Amplitude: 1 V ±20% into a ≥50 Ω load; 500 mV from
base to top into a 50 Ω load
Frequency: 1 kHz ±5%
USB 2.0 Port One front-panel and four side-panel mounted USB 2.0
connectors
Aux Trigger Input TekVPI interface; ±5 V (50 Ω); 150 V CAT I, derate at
20 dB/decade to 9 V
RMS
above 200 kHz (1 MΩ)
Side Panel
Parallel Port IEEE 1284, DB-25 connector
Audio Ports Miniature phone jacks for stereo microphone input and
stereo line output
Keyboard Port PS-2 compatible
Mouse Port PS-2 compatible
LAN Port RJ-45 connector, supports 10Base-T, 100Base-T, and
Gigabit Ethernet
Serial Port DB-9 COM1 port
VGA Video Port DB-15 female connector; connect a second monitor to use
dual-monitor display mode. Supports basic requirements
of PC99 specifications
Oscilloscope VGA
Video Port
DB-15 female connector, 31.6 kHz sync, EIA RS-343A
compliant, connect to show the oscilloscope display,
including live waveforms on an external monitor or
projector
Rear Panel
Power 90 to 264 V
RMS
, ±10%, 47 to 63 Hz; CAT II, <400 VA
Analog Signal Output BNC connector provides a buffered version of the signal
that is attached to the CH3 input when CH3 is selected
as trigger source
Amplitude 50 mV/div ±20% into a 1 MΩ load
25 mV/div ±20% into a 50 Ω load
Bandwidth 100 MHz into a 50 Ω load
External Time Base
Reference In
BNC connector, time-base system can phase-lock to
external 10 MHz reference
Time Base Reference
Out
BNC connector accepts TTL-compatible output of internal
10 MHz reference oscillator
Aux Trigger Output BNC connector provides a TTL-compatible, polarity
switchable pulse when the oscilloscope triggers
GPIB Port IEEE 488.2 standard
20 www.tektronix.com