atwood Specialty Couplers - Manual (Page 3)

Atwood Mobile Products warrants to the retail owner and subject to the
below mentioned conditions, that this product will be free of defects in
material or workmanship for a period of two years from the original date of
purchase. Atwood’s liability hereunder is limited to the replacement of the
product, repair of the product, or replacement of the product with a recon-
ditioned product at the discretion of the manufacturer. This warranty is
void if the product has been damaged by accident, unreasonable use,
neglect, tampering or other causes not arising from defects in material or
workmanship. This warranty extends to the original owner of the product
only and is subject to the following conditions:
1. For two (2) years commencing with the date of purchase, Atwood will
provide the replacement or repair of any Hardware System and
Components that are found to be defective by Atwood in material or
workmanship.
2. In the event of a warranty claim, the original owner must contact
the Atwood Consumer Service Department, 1120 North Main,
Elkhart, IN 46514 USA. Phone: (574-264-2131). Warranty Claim
Service must be performed as approved by the Atwood Consumer
Service Department. Warranty replacement hardware systems and
components or parts will be furnished freight. Prepaid labor cost to
repair or replace will be limited to the amount of the original purchase
price of the systems and components. The replaced warranty products
or parts become the property of Atwood Mobile Products and must be
returned to the Atwood Consumer Service Department freight prepaid,
unless prior arrangements have been made.
3. This limited warranty is valid only when the product is applied, installed,
maintained and operated in accordance with this Atwood Installation
Maintenance and Operating Manual. Any deviation from these recom-
mended specifications must be approved in writing by Atwood.
4. ANY IMPLIED WARRANTIES arising by way of State Law, including any
implied warranty of merchantability and any implied warranty of fitness for
a particular purpose are limited in duration to the term of this Limited
Warranty. Atwood makes no further warranty of any nature beyond this
Limited Warranty. No person has authority to enlarge, amend or modify
this Limited Warranty.
5. Any action to enforce this warranty shall not be commenced more than
one (1) year after the expiration of this warranty. 11.21.07
ATWOOD LIMITED WARRANTY
4. When ball is completely nested in ball socket, push forward on latch ( FIG 3.)
For adjustable height couplers, be sure that the nib ( FIG 2-A) on the latch
is secured in slot ( FIG 2-B.)
5. After closing coupler on ball, extend jack to ground and lift car/trailer
combination 2˝-4˝ to insure coupler is securely attached to tow ball.
Retract jack before towing.
6. Insert padlock or bolt through hole in latch.
Note: These couplers are not adjustable for ball size.
MAINTENANCE
1. Lubricate ball socket and ball clamp with wheel bearing grease.
Clean and lubricate monthly.
2. Check towing hitch, ball and coupler for signs or wear before each
trip. Replace coupler if damaged of worn.
3. Lubricate moving or sliding parts monthly with S.A.E. 30 weight oil.
4. Should problems or questions arise, contact your dealer, the trailer
manufacturer or Atwood Service Department 574-264-2131 between
the hours of 8:00 AM and 4:50 PM CST.
5. For Warranty information contact Atwood before having any work
done 574-264-2131.