Autel Maxivideo MV301 - Manual (Page 7)

6
1) Handheld Display Unit- The ergonomic tool with
comfortable pistol grip design.
2) Cable Connector – Connects the handheld display unit to
the imager head and cable.
3) Imager Head and Cable – Connects to the instrument
while in use to view images and videos.
4) Power Indicator Light – Illuminates green once the tool is
turned on.
5) Tool’s Signal Output- Connects to the monitors signal
input to function properly.
6) Roll Switch- Turns on the power of the tool and adjust
brightness of LEDs.
7) Battery Compartment Cap – Indicates to install or remove
batteries.
8) Monitor – Attached or detached from the tool.
9) Accessory Magnet – Picks up metal objects such as
dropped rings or screws on the floor.
10) Accessory Mirror – Helps users look around corners and
see inside the unreachable areas.
11) Accessory Hook – Unclogs obstacles and picks up wires in
the pipes or confined areas.
Fig. 2