Autel MaxiDiag Elite MD701 - Manual (Page 27)

25
Figure 5.16
User is allowed to check the details of each system, quickly erase
DTC, save the data, and display DTC from the Auto Scan menu
screen. To select the options on the bottom, simply press the
corresponding function button.

Save –You can save the Auto Scan information as “Vehicle
Record” so that you will not need to follow the vehicle selection
process again on the same vehicle in later tests. For detailed
instructions, please refer to 5.2.4 Save and retrieve files.

Quick Erase – By selecting this option, the scan tool will erase
all displaying DTCs and once again read the data and check the
latest status of the system. If the system did not repair, the
trouble codes will keep on displaying.

Display DTC – This option allows you to read DTC definitions
in the highlighted system. If more than one fault is detected in a
system, the scan tool will display an option list for you to view
different kind of DTCs or freeze frames.
Figure 5.17
100% Auto Scan
PCM- Powertrain Fault 1
Control Module
Quick Erase Save Display DTC
Select Option
1.CMDTCs(Continuous memory
diagnostic trouble codes)
2.Freeze Frame-Mode 2
3.pending