Avision AV121 (FF-0506/FF-0508/FF-0608S) - Manual (Page 82)

User’s Manual
7.4 Replacing the ADF Roller
Please follow the procedure below to replace the ADF roller.
For ordering the ADF roller, please consult your nearest dealer.
After replacing the ADF roller, be sure to click the “Reset
Roller Count” button in the Scanner Properties dialog box to
reset the roller count.
The Disassembling Procedure
1. Move the end of the yellow clipper face up with a flat
screw driver as indicated.
The Yellow Clipper
Move the
end face
up
7-5