Cleaning the image sensor, Cleaning the image sensor -3 – Avision IS15 (FS-0913B) User Manual
Page 24
Advertising
6.3
Cleaning the image sensor
1. Clean the scanner’s outer casing first using a soft, lintless cloth.
2. Make sure the scanner is disconnected from the power supply.
3. With one hand pressing the product, insert the sensor cleaning swab into
one end of the feeding slot with the other hand, as shown below:
The Sensor
Cleaning
Swab
4. Gently slide the sensor cleaning swab back and forth from one end of the
feeding slot to the other five or six times consecutively.
5. Remove the sensor cleaning swab, store it in a safe place and protect it
from dust.
6-3
Advertising