Avlex ACT-30T Bodypack Transmitter - Manual (Page 7)

! Frequency Band, Group & Channel and Frequency
are factory pre-set, thus, its parameter values are
displayed after it is ACT synced. Values cannot be
changed.
( ) Frequency Band
( ) Group and Channel
( ) Frequency
Setting Input Sensitivity Level
! 4 Selectable Sensitivity Levels: LINE、MIC-L
(MICROPHONE-LOW)、MIC-M (MICROPHONE-
MID)、MIC-H (MICROPHONE-HIGH).
! Press MODE button until mode
appears.
! Press SET button once to activate function.
! Press SET button to select the desired sensitivity
level.
! Press MODE button to confirm and save the
change.
! The higher the sensitivity level, the lower the
dynamic range of input signals. Meanwhile noise
will increase, and the feedback problem will be
getting more serious.
NOTE: Guitar setting is recommended at LINE level.
AF GAIN
8 9
Bodypack Transmitter Bodypack Transmitter
MIC-H
AF GAIN
MIC-L
AF GAIN
LINE
AF GAIN
MIC-M
AF GAIN
8A
BAND
07 03
CH GRP
802.000
MHz
FREQUENCY