Avlex ACT-80T Wideband Digital Bodypack Transmitter - Manual (Page 9)

Digital Bodypack Transmitter Digital Bodypack Transmitter
14 13
AF LOW-CUT: Setup and Change of Low Frequency
Cut Off
a. Press MODE and stop on the AF LOW-CUT
function; the display showing the current status
will be flashing and is ready to be modified.
b. Press the SET button while the display is
flashing to change to LOW CUT or FLAT as
desired.
LOW CUT
AF LOW-CUT
FLAT
AF LOW-CUT
**Note:
When the AF LOW-CUT function is LOW CUT,
the frequency response below 100Hz will
decrease about 3dB with a slope of -
6dB/Octave.
Y E S N O
AF LIMIT AF LIMIT
AF LIMIT: Setup and Change of Input Limit
a. Press MODE and stop on the AF LIMIT
function; the display showing the current status
will be flashing and is ready to be modified.
b. Press SET while the display is flashing to change
the setting to ON or OFF.
**Note:
When the LIMIT is ON, the maximum output of
the receiver is limited to 1V.