B&K Precision 1667 - Manual - Manual (Page 8)

8
Front Panel
1. Power Switch -- Turns the power supply ON/OFF.
2. DC Voltmeter (LED Display)* -- Indicated the present output voltage with auto range.
3. DC Ammeter (LED display) -- Indicates the present output current with auto range.
4. Constant Current Mode (C.C.) -- Indicator Indicates the power supply is operating in constant current mode.
5. Constant Voltage Mode (C.V.) -- Indicator Indicates the power supply is operating in voltage mode.
6. Current Fine Adjust -- Fine adjust knob for current limiting point and current value in constant current mode.
7. Current Coarse Adjust -- Coarse adjust knob for current limiting point and current value in constant current mode.
8. Voltage Fine Adjust -- Fine adjust knob for the output voltage in voltage mode.
9. Voltage Coarse Adjust -- Coarse adjust knob for the output voltage in voltage mode.
10. Output Terminal Positive ( + ) -- Terminal for tapping of positive (-}-) output.
11. Output Terminal Negative (-) -- Terminal for tapping of negative (-) output.
12. GND Terminal -- Chassis ground terminal. Normally, this is connected to either the + or - terminal depending on the
application.
Rear Panel
12. Fan -- Allow at least 80 mm space from wall.
13. Input Socket with fuse.