B&K Precision 1686A - Manual - Manual (Page 7)

7
CONTROLS AND INDICATORS
7. OUTPUT “+” Terminal (Red). Positive polarity output
terminal.
8. OUTPUT “–” Terminal (Black). Negative polarity output terminal.
9. TIE POINTS (2A MAX). Red terminals are +, Black terminals
are –. Load must not exceed 2 amperes.
10. Line Cord.
11. Fuse.
12. Fan.
1. POWER Switch. Turns power supply on and off. Power on
indicated by pilot lamp above switch.
2. Power ON light. Lights when power is turned on.
3. OVERLOAD Indicator. Lights when overload condition
exists.
4. VOLTAGE Control. Adjusts output voltage. Read value on V
Meter.
5. A Meter. Indicates output current on 0 to 20 amp. scale.
6. V Meter. Indicates output voltage on 0 to 20 volt scale.