B&K Precision XLN60026 - Manual - Manual (Page 109)

13
1.9
Connecting AC Input
The power supply’s AC input is rated for 100 V – 240 V, with frequency
of 47 Hz – 63 Hz. Before connecting to an external AC power source, be
sure that the power switch is in the OFF state and use the supplied power
cord assembly. connected.
Warning:
SHOCK HAZARD The power cord provides a chassis
ground thought a third conductor. Verify that your
power outlit is of the three-conductor type with the
correct pin connected to earth ground.
Follow the illustrations below to connect the AC power cord to the AC input
of the power supply in the rear panel.
1.
First, connect the input receptacle (green terminal block) of the cable to
the input terminals of the power supply.
2.
Align the power cord housing mounting holes on the left and right side
3
4
Step 4
5
Step 1
1
2
Step 5
Step 2
7
6
Step 3