B&K Precision 4034 - Datasheet - Manual

The 4033 and 4034 are high performance pro-
grammable pulse generators for testing digital
systems and circuits based on TTL, CMOS, or
ECL technologies. Both instruments generate
clean and accurate pulses at up to 6 digits reso-
lution with a repetition rate up to 50 MHz, vari-
able pulse widths from 10 ns to 10 s, and pulse
delays from 0 ns to 10 s. Output levels are
adjustable from -10 V to +10 V, with pulse
amplitudes settable from 0.1 Vpp to 10 Vpp into
a 50 ohm load. All parameters, modes, and
functions are programmable via the front panel
or remote control commands. Additionally, the
pulse generators provide selectable complemen-
tary pulse and double pulse generation in contin-
uous, triggered, gated, and counted burst
modes.
50 MHz Programmable Pulse Generators
Models 4033 & 4034
Description Features & Benefits
Applications
Data Sheet
w w w w w w..b bk k p prre ec c iis siio on n..c c o om m
■ Repetition rate of 0.1 Hz to 50 MHz
■ Flexible trigger modes: Continuous, Triggered
(internal, external, manual), Gated Burst and
External Width
■ Pulse width programmable from 10 ns to 10 s
■ Transition times (rise and fall times) variable
from 6 ns to 100 ms
■ Programmable delay and double pulse
■ Predefined amplitude levels for ECL, TTL, and
CMOS signals
■ Store up to 99 different test setups with auto
retention of last power down setup
■ 10 Vpp into 50 ohm output
■ Closed case calibration
■ Programmable via GPIB and RS-232
■ SCPI compatible
■ Three year warranty
■ Automatic Test Equipment (ATE)
■ Avionics and radar testing
■ Switching power supply testing
■ Characterization of active components
Dual-Channel Model 4034
■ Both channels offer full functionality and all
parameters such as pulse width and transition
time can be set independently
■ Synchronize both channels with the push of a
button
■ Saves cost and bench space
Technical data subject to change
© B&K Precision Corp. 2010