B&K Precision MDL Series - Manual - Manual (Page 47)

47
Module Panel
Figure 23 - Module Front Panel
1. VFD DISPLAY
Bright VFD display shows module‘s operating mode.
2. ROTARY KNOB
Used to change parameter values.
3. PANEL KEYS
Key Description
A/B
(single channel modules)
Switch A/B transient preset value.
L/R
(dual-channel modules)
Switch the left/right channels. Press this key + rotary knob to control
the two channels.
Short
Used for short testing. This allows the load to simulate a short circuit
at the input.
Mode Switches the operating mode (CC, CR, CV, CW, CZ).

Move the cursor position. Press key to move the cursor to the position
you want to edit, and then use the rotary knob to adjust value.