BlueBird S530B_968999683 - Manual (Page 20)

20 - BLUEBIRD
8060-008
Adjust depth control knob
8060-003
1. Rear wheel control handle
2. Clutch control
Aerating controls
1
2
Aerating
1. Start engine and adjust throttle setting to provide
comfortable walking speed and maintain control
of the equipment at all times.
2. Adjust depth control knob to desired depth.
Coring depth decreases by turning the knob
clockwise. NOTE: raising rear wheels all the way
up to obtain maximum coring depth reduces the
unit’s stability but increases length of core.
3. Push down the rear wheel control handle to lower
aerating tines into the ground (rear wheels will
rise).
4. Push down on handle bar for better tine
penetration and maneuverability (front wheel will
rise).
5. Engage clutch control.
6. To stop, release clutch control.
oPeRAtIon