BlueBird S22S6DA_968999681 - Manual (Page 9)

9
SAFETY INSTRUCTIONS
• BlueBird original spare parts are designed and
specifi ed to maintain high quality and correct fi t
for optimal durability and lifespan. From a safety
point of view, you should only use BlueBird original
spare parts.
• Check that all safety decals are in place. See the
chapter ”Symbols and decals”.
• Learn how to use the machine and its controls
safely and learn to recognize the safety decals.
• Only use the machine for sowing and dethatching
lawns. It is not intended for any other use.
• Check that the machine is in serviceable condition
prior to use; see the chapter ”Maintenance/
Maintenance schedule”.
• Only use the machine in daylight or in other well-lit
conditions. Keep the machine a safe distance from
holes or other irregularities in the ground. Pay
attention to other possible risks.
• Only allow the machine to be used by adults who
are familiar with its use.
• Never allow children or persons not trained in the
use of the machine to use or service it. Local laws
may regulate the age of the user.
• People and animals can distract you causing you
to lose control of the machine. For this reason, you
should always concentrate and focus on the task
at hand.
• Never leave the machine unsupervised with the
engine running.
• Make sure that other people are nearby when you
are using the machine so that you can call for help
should an emergency arise.
• The machine is tested and approved only with the
equipment originally provided or recommended by
the manufacturer.
Overexposure to vibration may lead to
circulatory or nerve damage, particularly
in people who have impaired circulation.
Contact your doctor if you experience
symptoms that could have been caused
by overexposure to vibration. Examples
of common symptoms include numbness,
pain, muscle weakness, change of
skin color or an uncomfortable feeling
of tingling. These symptoms appear
most frequently in the fi ngers, hands or
wrists.
WARNING!
The engine can become very hot. To
avoid being burned, you must turn off
the engine and wait until all parts have
cooled before touching the engine.
WARNING!