Brickcom VD-series - Manual (Page 30)

27
c. If the connection was successful, the user will see the message:
“Congratulations. The installation of the camera is complete.”
When this window is displayed, click <PC-NVR> to start the PC-NVR
program, <Live View> to view the live video from the connected IP
camera, or <X> in the top right corner of the screen to close the
installation window. If the user starts the PC-NVR program, please refer
to the PC-NVR user manual.
Click <Live View> to view the live video feed of the network camera.
Enter the default user name (admin) and password (admin) in the
prompt request dialogue.
After connecting to the network Vandal Dome Camera, the request for
installing the ActiveX control will appear below the URL bar. Right click
on the bar, and click “Install Brickcom ActiveX Control.” to permit ActiveX
control installation.
In the pop-up security warning window, click “Install” to start
downloading Viewer software on the PC.
Click “Finish” after Viewer installation is complete.