Brickcom OSD-040 36x Series - Manual (Page 30)

26
E. If the camera supports the EasyLinkTM function, the following page will
be displayed. Otherwise, this page will not be shown. *If desired, click
<Skip> to skip this setting.
EasyLinkTM is a unique Brickcom function which allows users to assign a
unique EasyLink name to their network camera’s IP address. There is no
need to configure the router to open up ports or remember
hard-to-memorize
IP addresses. Users can log onto
[uniqueEasyLinkname].mybrickcom.com to view the camera’s web GUI and
live view.
a. Enter a unique EasyLink name whose length must be between 5-32
characters.
b. When finished, click the arrow button to continue.