Troubleshooting, Respecting and conserving the environment – Indesit TZAA 1 User Manual

Page 47

Advertising
background image

GB

47

Respecting and conserving the environment

• Install the appliance in a fresh and well-ventilated room. Ensure

that it is protected from direct sunlight and do not place it near
heat sources.

• Try to avoid keeping the door open for long periods or opening

the door too frequently in order to conserve energy.

• Do not fill the appliance with too much food: cold air must

circulate freely for food to be preserved properly. If circulation is
impeded, the compressor will work continuously.

• Do not place hot food directly into the refrigerator. The internal

temperature will increase and force the compressor to work
harder and will consume more energy.

• Defrost the appliance if ice forms (

see Maintenance). A thick

layer of ice makes cold transference to food products more
difficult and results in increased energy consumption.

• Regularly check the door seals and wipe clean to ensure they

are free of debris and to prevent cold air from escaping (

see

Maintenance).

Troubleshooting

If the appliance does not work, before calling for Assistance (see
Assistance), check for a solution from the following list.

The green POWER indicator light does not illuminate.
• The plug has not been inserted into the electrical socket, or not

far enough to make contact, or there is no power in the house.

The WARNING Indicator light is Always On.
• The door is not closed properly or has been open continuously.
• The door has been opened too frequently.
• The TEMPERATURE ADJUSTMENT knob is not in the correct

position.

The motor runs continuously.
• The TEMPERATURE ADJUSTMENT knob is in the “Fast Freeze”

position: the yellow FAST FREEZE indicator light is on (

see

Description).

• The door is not closed properly or is continuously opened.
• The outside ambient temperature is very high.
• The thickness of the frost exceeds 2-3 mm (

see Maintenance).

The appliance makes a lot of noise.
• The appliance has not been installed on a level surface (

see

Installation).

• The appliance has been installed between cabinets that vibrate

and make noise.

• The internal refrigerant makes a slight noise even when the

compressor is off. This is not a defect, it is normal.

Advertising