Carlon Multi-Gard Fiberglass Product Description - Manual

MULTI-GARD ® FIBERGLASS RACEWAY
www.carlonsales.com
General Description
Multi-Gard Fiberglass is a multi-cell raceway system for bridge crossing
applications consisting of 20' overall lengths of either standard wall, heavy wall
or
bullet resistant 4" fiberglass outer shell with 3 x 1 1/2" or 4 x 1 1/4" nominal pre-
lubed innerducts preinstalled. In addition, fixed bends with "cutthrough" resistant
engineered plastic innerducts are available along with many other accessories
for terminating, cable pulling, and cable blowing.
Features
• Preinstalled silicone lined PVC innerducts reduce coefficient of friction for
easy cable pulling or jetting.
• Anti-reversing gaskets on coupling body allow easy push in hard to pull
out sealing system.
• Jettable using high-speed air blowing systems.
• Oring gasket at base of bell reduces risk of water entering system.
• Inward tapering holes on coupling body give quick and easy innerduct
alignment.
• Marked innerduct and marked hole on coupling body ensure proper
innerduct alignment.
• Couplings in standard and slip sleeve reduce waste.
• Transition adapters to allow transition between different outerducts.
• Deep bell provides strong joint.
• Internal spacers keep innerducts straight.
• Staging materials to job site is simplified.
• Standard Wall .070" provides basic mechanical and UV protection.
• Heavy Wall .090" provides enhanced mechanical protection where
physical abuse might be experienced.
• Bullet Resistant .250" provides heavy duty protection.
• Lightweight construction for easy handling.
Gross Automation (877) 268-3700 · www.carlonsales.com · [email protected]