Double Power Technology MD-702 - Manual (Page 40)

>>Connect to a WLAN using a Wi-Fi
Protected Setup (WPS)
You can connect to a secured network by using a
WPS button or WPS PIN. To connect to a WLAN
with a WPS button,
In Menu mode, select Settings [ ] → Wireless
& networks → Wi-Fi settings → WPS PBC.
Press a WPS button on the access point within 2
minutes.
To connect to a WLAN with a WPS PIN,
In Menu mode, select Settings [ ] → Wireless
& networks → Wi-Fi settings.
Select a network indicated by the WPS icon and
select WPS PIN.
On the access point, enter the PIN and press the
start button.
3G connection
Select Setting [ ] →Wireless & networks
→Mobile networks → Data enabled
Ethernet connection
Select Setting [ ] →Wireless & networks
→Ethernet settings → Ethernet
Connectivity 38