Double Power Technology BT-200 - Manual (Page 6)

Channels:
BT-200 Operation
6 EN
1. CH01: Bluetooth mode (Default )
2. CH02: Auxiliary
Press " M " button to change channel.
Channel
Note:
Volume:
Press "Volume up/down" button (see page4) to adjust sound.
Vol-
There are two different modes.
Vol+
To connect while in Bluetooth mode.
Sync and pair the two devices.
Once connection is established, begin to play music, make,
answer, or end a phone call.
If asked for a PIN, enter "0000".
Discovery:
Power on. (Default CH01Bluetooth)
The other Bluetooth compatible device will find "BT-200".
Connection:
Discover or Pairing:
If device is connected, an alternating, blue and red, light will
flash.
Standby:
While device is searching, an alternating, blue and red, light
will flash.
Active:
Once Bluetooth device is connected successfully, a blue light
will flash slowly.
Note:
To connect to a device: notebook, mobile phone, tablet etc.
follow the instructions for the device.
Once the speaker is connected, set sound to
If the device cannot connect to the speaker, simply reboot the
speaker.
"Output"
Bluetooth:
Mode