Chenbro RM31616 3Gb/s 16-port 3.5 mini-SAS Backplane(80H103316-001), Rev. A2/B0 - Manual - Manual (Page 6)

6
16-Port Mini-SAS Backplane 80H103316-001 ver. A2 & B0
User’s Manual
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]
www
.chenbr
o.com
Backplane Layout
Front view ( HDD slot IN )
Rear View ( Host Connectors IN )
[CN011~CN0161] : Connect to 22-pin SATA-II or 29-pin SAS HDD 1~16
[CN1-4] : HDD 1~4 Failure Signal Pin Header
[CN5-8] : HDD 5~8 Failure Signal Pin Header
[CN9-12] : HDD 9~12 Failure Signal Pin Header
[CN13-16] : HDD 13~16 Failure Signal Pin Header
Connect the 4-pin HDD LED cable (26H113322-001) from CN2 to the
CATHODE of the HDD failure connector on RAID card. Refer to the RAID
card’s user manual for the detail pin definition.
[ACT_CN1-4 / ACT_CN5-8 / ACT_CN9-12 / ACT_CN13-16] :
HDD 1~16 Additional Activity Signal Pin Header (From RAID Card)
[FAN1 / FAN2 / FAN3 / FAN4] : 3-pin Fan connectors
[CN1 / CN2 / CN3 / CN4] : Standard 4-pin Power connectors
[PC1] : 4-pin Power connector for Optical Drive
[PC2] : 4-pin Power connector for FDD
[CN5] : Fan Signal Pin Header (connecting to LED Board)
CN15
PC2
CN011~CN161 LD011~LD161
Backplane Bracket Mounting Hole
PC1
CN18
CN25
CN28
Fan1
CN1-4
CN5-8
CN9-12
CN13-16
Fan2 Fan3 Fan4
CN1
CN2
CN3
CN4
SW1
CN5
ACT_CN
1-16
HDD1
HDD5
HDD9
HDD13
HDD2
HDD6
HDD10
HDD14
HDD3
HDD7
HDD11
HDD15
HDD4
HDD8
HDD12
HDD16
JP1