Chenbro RM91250 3Gb/s 4-port 3.5 mini-SAS Backplane(80H10321513C0) Rev.C0 - Manual - Manual (Page 10)

4-Port Mini-SAS Backplane 80H10321513C0
User’s Manual
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]
10
www
.chenbr
o.com
(B) Example of assembly procedure in RM41416B chassis
1. Get the complete 4U backplane assembly set (with two 2U backplane assembly sets) ready and
make sure the backplane guide rail is installed before backplane assembly.
2. Make sure the backplane ID is configured properly from bottom to top with starting from #1 to #4.
3. Slide the backplane assembly set into the chassis one by one.
4. Fix the backplane assembly set with screws on both sides of chassis.
5. Connect the LED board signal cable for each backplane and LED board.
6. Refer to “Backplane wiring” session for the cable connection.
Backplane ID#4
Backplane ID#3
Backplane ID#2
Backplane ID#1
Fix Screws
4
4
1
2
3
5