Chenbro SR107 Series - Installation - Manual (Page 36)

SR209/105/107 USER’S GUIDE
Revision: 1.0 3 6
3.9 Add-on card guide and Retainer, SR107
I. Detaching Add-on card retainer
For convenience of instalaltion or
cabling, user could want to remove
the add-on card retainer.
Push the release button on the top of
add-on card holder, and then pull it
out.
Move it upward slightly, and then
detach it totally from chassis body.
II. Releasing Add-on card retainer
Press both releasers, pointed by
arrows, and rotate toward righ
t.
The hold down clamp will be fixed at
position as Figure 3-33.
User can install the full-size PCI card,
which will be guided and fastened by
this holder.
Figure 3-31
Figure 3-32
Figure 3-33
(a).
(b).
(c).
(a).
(b).