Envizen MDP1008 User Manual - Manual (Page 15)

14
Trouble Shooting Guide
Symptom Correction
No power • Check if the AC adapter of power plug is connected
securely.
• If powered with the battery, check if it is exhausted.
No picture/sound • Make sure the connection is in good condition; volume is
not too low; audio receiver or TV work normally; audio
setting is proper.
The player does not
start playback • The DVD+-RW you played should be finalized, and not
be an empty disc.
• Place the disc with the graphics side up and make sure
it's inside the guide.
• Make sure the disc is free from scratches & fingerprints.
• Insert a playable disc. (Check the disc type and color
system).
• Do not playback a disc which region code is different
from that of your player.
• Clean the disc.
• Cancel the parental lock function or change the parental
lock level. (The Pre-set password is 123456.)
• Reset the player.