I-View DM-650IR-F40 IR Dome Waterproof UTP Camera - Manual (Page 2)

2
„ Installation Notes:
1. Please use point-to-point Unshielded Twisted Pair wire, 24-16 AWG, Category 2, 3, 4, 5, or 6.
2. Please measure the wire distance, Use only transceivers that are designed for that distance.
3. Please make sure the pair of wires carrying the video signal is sent as a twisted pair (e.g. the Blue-white/White-blue
wires twisted together as a pair), not a “split-pair” (e.g. blue-white conductor, part of one pair / orange-white conductor,
part of another pair).
„ Installation Warning:
1. Please DO NOT USE SHIELD TWISTED PAIR WIRE. This will cause severe degradation on distance performance and
reduce the inherent interference immunity.
2. Please DO NOT have “bridge-taps” or loading coils in installation.
3. If the phone company provides the cable runs between buildings, make sure it’s “dry copper”.
4. Due to near-end cross talk, don’t send a transmitted and a received signal in the same wire bundle. For safety, DO
NOT put UTP cable in the same conduit as high-voltage wiring.
„ Specification:
DM-650IR-F40 (60/80)
Image Device OSD Menu Setting
Image Device: 1/3“ SONY EXview HAD CCD II
(Effio-E)
Effective Picture Elements: PAL: 1024(H)x596
(V); NTSC: 1028(H)x508(V) Flicker Less: ON/OFF
Gain Control: Auto (4 steps)
Dynamic Noise Reduction: 2D
Motion Detection: ON / OFF (24x16 Zones)
Day/Night Mode: Color / B&W / AUTO / Ext.
Back Light Compensation: HLC / BLC / OFF
Privacy Mask: ON / OFF (8 programmable mosaic
zones)
Control Parameters: Menu OSD (With an optional
OSD cable control)
White Balance: ATW / PUSH / USER define /
ANTI CR / MANUAL / PUSH LOCK
Video
Horizontal Resolution: Color: 650TVL, B/W:
700TVL
Video System: NTSC/PAL (Optional)
Video Output: 1Vp-p output with RJ-45 connector;
BNC type connector (Option)
Video Characteristic
Gamma Characteristic: 0.45
Sync. System: Internal
S/N Ratio: More than 50dB (AGC Off)
Shutter Speed Control: AUTO (1/50(60) ~
1/100,000 sec.)
Wide Dynamic Range: ATR Digital WD (ATR:
Adaptive Tone-curve Reproduction)
Surge Protector
Video: Peak Inverse Blocking Voltage:
VPIB= 100V; Peak Pulse Current: Ipp=44A;
Clamping Voltage: 10V @ Ipp= 5A
Power: Max. Energy: 3.6J @10/1000µs;
Clamping Voltage: 16.8KA(1 Time)
/8.4KA(2 Time) @8/20µs (1 Time);
Insulation Resistance:≧ 10000MΩ
Lens & IR Illuminators
Lens: 4 mm / F1.6 (optional: 6mm/8mm)
Infrared Luminary: 36 pieces Ø5 IR-LED; up
to 25m illuminate distance for day & night
application
Illumination
Dimension/Weight Minimum Illumination: Color: [email protected],
B/W: 0 Lux (IR LED on)
ψ 135.5mm x 86 mm (H) / 0.45Kg
Operation Transmission Distance
Power Consumption: IR ON: DC 24V/140mA
max, IR OFF: DC 24V/25mA.
Operation: Temperature -10°C ~ 50°C; Humidity
20% ~ 80% RH Transmit Video / Power up to 300 meters via Cat. 5
or better UTP cable
Housing
Waterproof IP67 metal housing 3-Axis bracket.