Lexibook RCD102TF - Manual (Page 15)

15
English
15
LOCATION OF CONTROLS
RADIO OPERATION
Refer to the image p.2
1. STOP button
2. PROG. (Program) button
3. REPEAT button
4. SKIP – (BACKWARDS) button
5. Power indicator
6. FM stereo indicator
7. LED screen
8. DIAL SCALE
9. PLAY/PAUSE button
10. SKIP + (FORWARDS) button
11. PLAY/PAUSE/PROG indicator
12. REPEAT indicator
13. FM antenna
14. FUNCTION selector (OFF/CD/RADIO)
15. AC input jack
16. VOLUME control
17. AUX IN jack
18. Battery compartment
19. AM-FM-FM ST BAND selector
20. RADIO TUNING knob
21. CD door
22. CD DOOR OPEN button
1. Slide the FUNCTION selector to the RADIO position to turn the unit on.
2. Slide the BAND selector to select AM, FM or FM ST (stereo) for the
desired radio band.
3. Use the RADIO TUNING knob to select the desired radio station.
4. Adjust the VOLUME control.
5. To switch off the radio, slide the FUNCTION selector to the OFF position.
Note: To ensure maximum FM tuner sensitivity, the FM antenna should be
fully extended to obtain the best possible reception. Avoid close proximity to
the speakers and other electrical appliances. For FM stereo reception, the FM
stereo indicator will light steadily when a stereo program is being received.
When tuning in AM reception, to ensure best AM sensitivity, try repositioning
the unit until the best reception is obtained.