Lexibook RCD150BB - Manual (Page 3)

5 English
UNPACKING AND SET UP
• Carefully remove the main unit and the AC Power cord from the display
carton. Remove all the packing material from the unit. Remove any
decorative or descriptive labels from the front or top of the cabinet. Do
not remove any labels from the back or bottom of the cabinet.
• Carefully remove any small strips of tape that may have been used to
prevent the CD door from opening in transit.
• Unwind the AC Power cord and extend it to its full length.
• This unit was shipped with a dummy CD transit card in the CD player.
This dummy CD prevents the laser pick up from moving during shipment.
This card must be removed before you can insert your own CDs. Lift the
CD Door OPEN Tab to open the CD door. Carefully remove the dummy
CD from the player and discard it. Close the CD door.
• Place the unit on a flat, level surface such as a table, desk, counter, shelf,
etc, convenient to a 230V 50Hz AC outlet, out of direct sunlight, and
away from sources of excess heat, dust, moisture, or strong
magnetic fields.
GETTING STARTED
• Operate controls and switches as described in the manual.
• Before turning on the power, make certain that the AC Power cord is
properly installed.
• Store your CDs in a cool area to avoid damage from heat.
• When moving the unit, be sure to first disconnect the AC Power cord.
PREPARATION FOR USE
4
WARNING
Choking Hazard–Small Parts and Packaging Materials. Not for children
under 5 years.
• All materials for fastening or packing purposes are not part of the unit
and should be discarded for children’s safety.
• Please keep all information for future reference.
• This is not a toy.
CAUTION! ELECTRICALLY OPERATED PRODUCT:
Not recommended for children under 5 years old. As with all electric
products, precautions should be observed during handling and use to
prevent electric shock. Ages 5+
0-5
NOTES:
• Please avoid using this unit in places of high temperature or humidity
over prolonged periods of time as damage may occur.
• Exposure to direct sunlight in places such as car interiors may cause
the unit to become warped and/or lead to malfunctioning.
• Avoid using or storing this unit in dusty or sandy locations.
PROTECT YOUR FURNITURE
This model is equipped with non-skid rubber “feet” to prevent the product
from moving when you operate the controls. These “feet” are made from
non-migrating rubber material specially formulated to avoid leaving any
marks or stains on your furniture. However certain types of oil based
furniture polishes, wood preservatives or cleaning sprays may cause the
rubber “feet” to soften and leave marks or a rubber residue on your furniture.
To prevent any damage to your furniture, we strongly recommend that you
purchase small self-adhesive felt pads, available at hardware stores and
home improvement centers everywhere, and apply these pads to the bottom
of the rubber “feet” before you place the product on fine wooden furniture.
English
RCD150BBIM0287.QXD:CD2849.QXD 7/27/07 1:03 PM Page 4