Lexibook DR900 - Manual (Page 4)

4 5
PRODUCT OVERVIEW
(See Fig.A)
1. Volume knob – radio on/off button
- Turn the volume knob clockwise to switch on the radio.
- Scroll the volume wheel to increase or decrease the
sound volume.
2. Channel button
Turn to change the radio frequency.
3. Backlight switch
Use the backlight switch to turn on and turn off the
backlight function.
(See Fig.B)
4. MODE button
Under Normal mode, press MODE to go from one mode to
another as follows:
Normal mode Hr/4Hr mode Alarm mode
Birthday Reminder mode Timer mode
5. SET button
- Under Normal mode, press SET to toggle between
Centigrade and Fahrenheit temperature display.
- Under Alarm mode, you can use SET together with
and to set the alarm time and the alarm music. There
are 7 world famous songs and  different “beep” sounds
to be selected. Press SET to set the alarm clock, when
the alarm sounds, the Alarm Music will play for one
minute. If snooze function is enabled, the Alarm Music will
sound totally four times, one time every three minutes.
- Under Birthday Reminder mode, you can press SET
together with and to adjust the date and time of
birthday reminder, then press SET to close birthday
reminder function. When the chosen time arrives, the
song will be played for five minutes.
- Under Timer mode, use SET to set the time at which
you wish the unit to count down from. The maximum
time is  hours, 59 minutes and 59 seconds. When the
time set arrives at “0:00 00”, the alarm will sound for one
minute, and “0:00 00” will also flash continuously.
6. button
- Press this button to decrease a setting.
- Under Normal status, press to open or close the
music function. When opening this mode, 7 different
popular songs will be played continuously.
7. button
- Press this button to increase a setting.
- Under Normal mode, press to activate or deactivate
the Snooze function.
8. RESET button
If abnormal conditions occur when the batteries are
installed, please press RESET.
9. DC plug (DC adaptor not included)
Power supply DC 4.5V input 0V AC 50Hz 4W output
DC4.5V 00ma Centre+
10. Battery block (batteries not included)
11. Antenna
12. Speaker
Note: For all the above status, if the button is not pressed
for one minute, the unit will automatically return to Normal
mode.
SCREEN LAYOUT
(See Fig. C)
1. Temperature display
2. Time and date display
GETTING STARTED
Install two AG batteries and two AA batteries (not
included) in the battery block at the back of the unit.
TIME SETTING
- When turning on the power for the first time, the normal
time displayed is :00.
- Under Normal mode, press MODE to enter Hr/4Hr
mode. Then press SET and use and to set
separately the date, time, hour, minute, year, month and
day as follows:
Hour Minute Year Month Day Exit
- Range: from 000 to 099 for year,  to  for month, to
 for day, to  or 0 to  for hour,0 to 59 for minute.
- Second gets reset to zero when adjusting hour or minute.
- When setting date, week (from MON to SUN) will change
accordingly.
Note: The unit automatically exits from setting and
displays current time and date if any button is not
pressed for one minute.
ENGLISH