Lexibook DJ050 Series - Manual (Page 23)

22 23
ENGLISH
TAKING PHOTOS (Camera Mode)
Turn the camera on to enter camera mode and take photos.
Taking a photo
Press the SHUTTER button to take a photo. The LED lights up and the
number of photos left to shoot at this resolution are displayed on the LCD
screen.
Note:
• When the camera’s built-in memory is full, if you try to take a photo, the
LCD screen will display a warning message.
• When the SD card inserted in the camera is full, the camera will beep
twice if you try to take a photo. Make sure you transfer your photos to your
computer.
Zoom
1. To zoom in, press the T button.
2. To zoom out, press the W button.
The slide bar shows the zoom level.
Macro/Far shooting
1. To shoot an object that is very close, slide the MACRO/FAR button to the
left position. appears on the LCD.
2. To shoot an object that is far away, slide the MACRO/FAR button to the
right. appears on the LCD.
Flash function
To use the flash, repeatedly press the UP/FLASH button until your desired
setting is shown by the icon on the screen:
Flash is on
Auto flash is on
Flash with red-eye reduction is on
Flash is off