Lexibook NLJ100 - Manual (Page 8)

8
ENGLISH
1. Use the lullaby switch located on top of the unit to select:
• : “Lullaby mode OFF”.
• : “Ethnic” lullaby.
• : “Classical” lullaby.
2. Use the timer switch on the left-hand side of the unit to determine how long the lullaby plays:
5, 10 or 15 minutes.
3. Press the start/stop button to start playing the lullaby. Press the button once again to stop the music.
4. Use the volume wheel on top of the unit to adjust the volume of the music.
NOTE: During playback, you can switch between “classical” and “ethnic” lullabies without resetting the
timer.
Projector Mode
1. Use the light display switch on the right-hand side of the unit to choose from three settings:
• : “Projector OFF”.
• : “Projector with timer”.
• : “Projector permanently ON”
2. When the light display switch is on the “Projector with timer” position , use the timer switch
on the left-hand side of the unit to set a timed playback. Then press the start/stop button once to
light up the projector. Press the same button again to switch it off.
3. To use the projector without the music, turn the lullaby switch on top of the unit to “OFF” position .
Lullaby Mode
Using Lullaby and Projector together
To use the lullaby and projector together:
1. Set the timer switch to the desired timed playback.
2. Turn the lullaby switch to 1 or 2.
3. Set the lighting display switch to the “Projector with timer” position to play the selected lullaby
and light projector for the selected time period.
4. Or set the lighting display switch to the “Projector permanently ON” position to play the selected
lullaby for the selected time period and keep the light projector switched on permanently.
5. When you have finished your setting, press the start/stop butto to start the music and the light show.
NLJ100IM0149.indb 8 16/06/2009 19:24