Lexibook JG6000SP - Manual (Page 12)

1
ENGLISH
START-UP GUIDE
This section explains briefly how to play with the Spider-Man TM Super TV Air Jet. It is recommended to
read the complete user guide for detailed instructions on the activities and safety warnings.
1. Inflating the Spider-Man TM Super TV Air Jet:
1 - Unpack the supplied air pump.
2 - Inflate the seat of the Spider-Man
TM Super TV Air Jet.
Unscrew the valve cap located at the back of the seat and
insert the large end of the air pump valve. While holding
firmly the valve located inside the product, press and
release the air pump until the seat is fully inflated at the
desire pressure. Screw the cap fully in.
3 - Inflate the lower section of the Spider-Man TM Super TV Air
Jet using the valve located at the back of the product as
indicated in step .
1
. Install batteries in the console: use a screwdriver to open
the battery compartment located at the back of the console,
install the 4 x LR6/AA batteries, close back the battery
compartment and tighten the screw.
Install batteries in the control Panel: use a screwdriver
to open the battery compartment located under the
speedometer. Install the 4 x LR6/AA batteries, close back the
battery compartment and tighten the screw.
2
. Connect the console to the television. The TV set and the
Spider-Man TM Super TV Air Jet MUST BE TURNED OFF.
Plug the AV cable (yellow end) into the matching video input
jack on your TV set and the AV cable (red end) into the
matching audio input jack on your TV set. Turn your television
ON and switch to the AV Channel. Turn ON the Control Panel
and the Console. After a moment, the menu screen should
appear on the TV.
Select the game leaning the sea scooter to the right or to the
left or using console keypad and press START to start
playing. For more details on the game, please go to the game
list section.
3