Lexibook JG7000 - Manual (Page 8)

8
English
Start-up guide
This section explains how to use the TV Sports Plug & Play wireless game. It is recommended to read
the complete instruction manual for detailed instructions on the activities and safety warnings.
1. Using a screwdriver, open the battery compartment under the console. Install the 4 x LR6/AA type
batteries (not included). Close back the battery compartment and tighten the screw.
2. Using a screwdriver, open the battery compartments located on the right side of the wireless
controllers. Install the 2 x LR3/AAA type batteries (not included), close back the battery
compartments and tighten the screw.
3. Connect the console cables into the A/V outlets of your television by matching the corresponding
colours of the cables and the A/V outlets.
WARNING: Switch off the TV and the console before making all connections.
4. Switch on the TV and select the AV channel. Press the ON/OFF key to switch on the console.
5. After the startup screen, the game selection screen will be displayed. To select the desired game,
use the SELECT key on the left side of the interactive mat. Press the START key to confirm and
start playing. For more details on the games, please go to the « Game list» section (p.10).
Contents of the packaging
1 TV Sports Plug & Play console with an interactive mat
2 wireless controllers
1 instruction manual
WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are not part of this toy and
should be discarded for your child’s safety.
Battery information
The TV Sports Plug & Play console operates with 4 X 1.5 V AA/LR6 type batteries (not in-
cluded) for the console and 2 X 1.5 V AAA/LR3 type batteries (not included) for each wireless
controllers.
Console:
1. Use a screwdriver to open the battery compartment located under the
console.
2. Install the 4 x LR6/AA type batteries (not included) observing carefully
the polarity indicated at the bottom of the battery compartment and as
per the diagram shown opposite.
3. Close back the battery compartment and tighten the screw.
Wireless controllers:
1. Use a screwdriver to open the battery compartments located on the
right side of the controllers.
2. Install the 2 x LR3/AAA type batteries (not included) observing carefully
the polarity indicated at the bottom of the battery compartments and as
per the diagram shown opposite.
3. Close back the battery compartments and tighten the screws.
1.5V
AA
ORLR
6
1.5V
AA
ORLR
6
1.5V
AA
ORLR
6
1.5V
AA
ORLR
6
1.5V SIZE AAA
LR 03
1.5V SIZE AAA
LR 03